The advantages of wave soldering process are mainly as follows:

2023-04-15

1. Save labor and materials, improve production efficiency and reduce costs.
2.Improve the quality and reliability of solder joints. Eliminate the interference and influence of human factors on product quality.Wave soldering
3, short production time. Wave Soldering process allows the contact time between the solder and the printed circuit board to be significantly shortened.Reflow Soldering
4.Simple production process. The drive system that transports the printed circuit board only moves in a straight line, making the manufacturing process simple.Welding Robot
5.Low consumption of auxiliary materials. The wave soldering process automatically positions the spraying and spraying of solder and has an adjustable spraying port design, reducing power and consuming auxiliary materials by 25% compared to the same period of time.
Wave soldering is equipped with an adjustable isolation air knife to isolate flux from entering the preheat box, ensuring production safety.
The advantages of wave soldering process are mainly as follows

The advantages of wave soldering process are mainly as follows

Wave soldering refers to the production process of electronic products, the circuit board components are mounted to the pads one by one, and through high-temperature heating to make them fixed together in the process. Wave soldering is an important part of the manufacturing of electronic products, it can ensure the stability and reliability of electronic products.

The basic principle of wave soldering is that the components to be soldered are placed on a conveyor belt and sent to the soldering position by a high-speed rotating conveyor belt. At the soldering position, the Soldering Robot takes off the components one by one and places them on the pads, and then sends the pads back to the soldering position with the conveyor belt for heating. During the heating process, the soldering robot aligns the solder head with the pads and fuses the pads to the components through high temperature heating.

The advantage of wave soldering is that it allows for efficient assembly while ensuring component stability and reliability. In addition, wave soldering can effectively avoid the influence of human factors on product quality, so it is widely used in the manufacture of electronic products.

Wave soldering is an important part of electronic product manufacturing, which can ensure the stability and reliability of electronic products. In the manufacturing of electronic products, wave soldering is widely used, and is an important means to achieve high efficiency assembly and ensure product quality.

Previous: Advantages of wave soldering Next: Wave Soldering

Mr. Zhang Peter

Email:

smt@mj880.com

Send Inquiry

Tel:86-0755-29098202

Fax:86-0755-29098202

Mobile Phone:+8613544118272

Email:smt@mj880.com

Address:2nd Floor, building 34, Second Industrial Zone, Shapu Wai community, Songgang Street, Bao 'an district, Shenzhen, Guangdong